As carbonated drink mixer Manufacture ,we supply bottle blowing machine, filling capping labeling and packing machine
1) The carbonated drink mixer machine consists of vacuum deaeration unit, CO2 injecting device, CO2 counter-pressure device, cooling PHE, Product tank, automatic controlling device. The automatic controlling system includes pressure automatic control, water proportion automatic control, liquid level automatic control, carbonization automatic control, temperature automatic control and electric automatic control for the whole machine.
2) Operation principles: After deoxidized by vacuums system, the product water is output through pump and flow meter. After cooled water enters into the carbonation tank through mixing pump and control valve. Before entering into the tank, the mixing liquid is treated with pre-carbonization course. The CO2 content is controlled by flowrate control valve. At the moment the carbonation tank is charged with CO2 counter-pressure gas, and the sparkling water is stored in the bottom of the carbonation tank, and then pumped to the filler.
3) The flow meter blender is a real sense of automatic mixing. It has automatic control systems for mixing ratio, temperature, carbonization and pressure. With human-computer interface, operators can adjust the parameter values to change the CO2 content of the product. If there is any fault, it can stop and give an alarm automatically.
4) High efficiency deaeration system. After entering into the deaeration tank, the treated water has to be deoxidized to reduce the oxygen content in the water. It is helpful for CO2 dissolving in next carbonization process. Meanwhile, it can reduce the oxygen dissolving in the water to ensure the quality guarantee of the product.
5) Before water entering into the deaeration tank, CO2 is exchanged with the air in the deaeration tank. Water is sprayed in high speed into the tank through many little nozzles. The water appears misty and has bigger superficial area. It is helpful to extract the gas in the deaeration tank through water-seal vacuum pump.
6) Capacity adjustment system. With adjusting the opening-value of capacity adjusting valve, it is easy to adjust the production capacity.
7) High efficiency and accuracy carbonation. The CO2 gas volume can be adjusted stepless online within a certain range.
|Capacity||Up to 15,000 liters per hour|
|Mixing type||Electronic Flow meter|
|Content of CO2||2.0～4.2GV|
|Water supply pressure||0.3~0.5 Mpa|
|CO2 Supply pressure||1.0~1.2 Mpa|
|Syrup supply pressure||0.2~0.4Mpa|
|Compressed air supply pressure||0.5~1 Mpa|
|Consumption of compressed air||6m3/h|
|Glycol supply pressure||0.2~0.3 Mpa|
|Total installed power||26.4kw|
|Low voltage control parts||Siemens / Schneider|
|Water pump||APV or Alfa Laval|
|Mixing pump||APV or Alfa Laval|
|Syrup pump||APV or Alfa Laval|
|Water flow meter||E+H|
|CO2 flow meter||E+H|
|Syrup flow meter||E+H|
|Capacity regulating valve||Samson|
|Syrup regulating valve||Samson|
|CO2 flow regulation valve||Samson|
Nearly30years, Sanxing Huifeng Machine has provided bottling & packing equipments of liquid solutions to companies all over the world, water bottling line, juice filling line, carbonated soft drinks turnkey project, oil and soda water bottling line and labeling and packing machinery.Sanxing Huifeng offers complete filling and packaging solutions for beverage industry and excellent lifelong time service.
|Water treatment system
Processing included: quartz sand filter, active carbon filter, sodium ion exchanger, precision filter, RO (Reverse Osmosis), UV sterilizer, finished water tank
|Carbonated soft drink mixing system
It can improve the proportion of water, syrup and carbon dioxide. It is used in carbonated beverage production line and sparkling wine. It is used to cooling the water before mixing which is connected with the mixer.
|Water soda drink bottle blow molding system
la máquina sopladora automática de botellas de PET contains
Main automatic blowing machine
high &low pressure compressor
high pressure air storage tank
air cooling dryer
Bottle mould follow the sample to design
|DXGF system washing filling and capping monoblock
Bottle washing filling and capping monoblck machine used for Carbonated soda juice Water and Soft Drinks,refresco water,sparking drinkPET round or square bottle
Volume :customized machine follow the bottle sizeCapacity up to 28000bph of 500ml
It is used to warm the carbonated drink bottle after low temperature filling, as the carbonated drink after filling, its bottle touch the outside air, it will has a lot small water drops outside, use this machine will warmer it to normal temperature, and after dryer machine, it will be good for labeling.
|PVC sleeve shrinking labeling machine
It adopts double driving structure which is a new and advanced driving device for the thermal shrink sleeve machine, that is,four-wheel driving, self-centering and balanced pressure of four wheels.
Application: PVC / PET / OPS label sleeve Stainless steel Main Machine Frame / Famous electrical components
|BOPP OPP hot melt glue labeling machine ,Etiquetadora de OPP
paper-plastic composite film label 、paper label
Label size:Max L400mm , Max W 200mm
Label Material: OPP (roll type)
Label Specification: According to customers’ demands
Labeling Way: Straight-line or Rotary hot melt glue labeling
In the packaging machinery industry, the film wrapping machine is the abbreviation of the wrapping film packaging machine,sometimes called the winding machine and the wrapping machine.
|Carton packing machine
Automatic carton case box packing machines
1.Standardized workshop of total 35,000 square meters.
2.Verification Certificates of equipments: ISO9001:2001; CE Certificate, SGS Certificate, BV Certificate, standard organisation of nigeria , cnca certificate, Logo trademark registration, etc.
3.The equipments will be tested and run for 24 hours before leaving the factory, to ensure the smooth working of water pipeline, and pneumatic, electrical and mechnical stability.
4.Sufficient stock of spare parts ensures the timely delivery and supply of spare parts.
5.The engineers are experienced. We can produce different products with different capacity and work out reasonable flow chart as per customers’ requirements to save space.
6.Professional installation team who can speak fluent English can help customers make benefits in a shortest time.
We control the quality of our equipments by manufacturing and machining ourselves. Pay attention to each assembly detail, and our experienced technicians monitor each key point efficiently during assembly, to ensure that the performance and appearance of each product be pefect.
Q1: Do you have reference project?
A1: We have reference project in most countries,If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
And you are always welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
Contact our sales people you can get video of our reference running machine
Q2: Do you have agent and after-service stations?
A2: So far we have agent in Yemen,Nigeria,Dubai,India,Kenya,Dubai welcome to join us!
Q3: Do you provide customized service
A3: We can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
Q4: What's your guarantee or the warranty of the quality if we buy your machines?
A4: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q5: How long time for installation?
A5: According your machines order,we will send one or two engineers to your plant,it will take about 10 days to 25 days.